1 in. Diam Big Dot Superconductor Bar
1 in. Diam Big Dot Superconductor Bar
Updated 10.15.24. Ordering Closes 10.17.24 at 3 PM EST.
To reserve your material, a 10% deposit is due (use code 10DEPOSIT at checkout). Once your material is ready, you will be emailed, the remainder 75% of the purchase price is due (use code CLOUD75 at checkout). All reservation orders will receive a 15% discount.
**Orders are not refundable and can’t be cancelled.
Shipping is expected January 2025
Notes on Superconductor
Various lengths can be selected through the drop down menu. If you select a length, you will receive a full length cut. For example, if you select a 12 inch length, you will receive a solid 12 inch length. Expect lengths to be +/- .125 in.. The diameter should be very close to what is listed, possibly a few hundredths up or down (+/- .06 in). Additionally all rods are straight. Because pieces are essentially identical, individual pictures of the rods are not provided. It is possible some flare or distortion of the pattern to occur, though it should be minimal. Please message if any questions. :)
Note: We do not offer returns on superconductor after it has been altered. The seams between the Niobium and Copper/Cupronickel are not welded and special considerations need to be taken into account when working with this material and minimum force should be applied as excess force can break the seam between the copper/cupronickel and niobium resulting in structural failure (Do not treat superconductor as a solid metal billet. Work Slowly). Do not let the superconductor become hot while working, heat caused by friction when working on the metal will expand the different metals at different rates, causing the seams between them to split and fracture. Using tools not designed for metal will especially cause more than usual stress and heat buildup (i.e. using drill bits and hole-saws designed for wood). All superconductor should be treated with care.